Home     About Us     Aluminium Extrusions     Aluminium Rolled     Aluminium Primary     Miscellaneous Products     Our Clientele    Century Metals    Contact Us
Untitled Document
 
   Aluminium Rolled Products

     

Metal India Rolled Products are produced in the following categories

 
 

  Aluminium Cold Sheets

 

Aluminium Cold Rolled Sheets

 

Width (Untrimmed):

 

  • Standard: 915mm, 1220mm
  • Non-standard: 400mm - 1220mm (for thickness of 0.7mm and above)
  • 500mm - 915mm (for thickness of 0.7mm and below)
Length:
  • Standard: 1830mm, 2440mm, 2745mm, 3050mm (approx.)
  • Non-standard: 1000mm - 4350mm
Thickness: 0.56mm – 5.00mm (length & width for sheets having thickness of over 4.00mm is subject to confirmation)
0.4mm – 4.0mm for non-heat treatable alloys (i.e. alloys of Al, Al-Mn, Al-Si, Al-Mg, etc)
Arbour Diameter:
  • Untrimmed: 750mm with full weight coils
  • Trimmed: 200mm – 500mm with increase of multiple of 50mm for coils with width range 100mm – 630mm, & 500mm for coils with width range 630mm – 1500mm
Temper: F/M, O, H1, H2, H3, H4 O, H1, H2 (for sheets in thickness over 3.25mm & in width over 915mm -1200mm)
Alloys: AI, AI-Mn, AI-Si, Almg etc.
Finish: Mill Finish
    Top

  Aluminium Cold Rolled Coils/Strips

  cold rolled strips

Aluminium Cold Rolled Coils/Strips

 

Width (Untrimmed):

 

  • Standard: 965mm, 1270mm, 1540mm (approx.)
  • Non-standard: 800mm - 1540mm
Width (Trimmed):
  • Available for thickness range of only 0.4mm – 2.0mm
  • Standard: 915mm, 1220mm, 1500mm (approx.)
  • Non-standard: 25mm - 1500mm
Thickness: 0.4mm – 8.0mm for heat-treatable alloys (i.e. alloys of Al-Mg-Si, Al-Cu-Mg-Si, Al-Zn-Mg-Si, etc)
0.4mm – 4.0mm for non-heat treatable alloys (i.e. alloys of Al, Al-Mn, Al-Si, Al-Mg, etc)
Arbour Diameter:
  • Untrimmed: 750mm with full weight coils
  • Trimmed: 200mm – 500mm with increase of multiple of 50mm for coils with width range 100mm – 630mm, & 500mm for coils with width range 630mm – 1500mm
Coil Density: 1.0 – 1.5kg/mm width (approx.)
Coil Weight: 1000 – 3000kgs (untrimmed coil), 250kg (trimmed coil)
Temper: M, O, H1, H2, H3, H4 (for coils of thickness 0.4mm – 2.0mm in trimmed condition with coil density of 1-2kg/mm width, & O, M with untrimmed edges in heat-treatable alloys
Finish: Mill Finish
    Top

  Aluminium Chequered Sheets

 

Aluminium Chequered Sheets

 
Types available: Five bars
Barfy Style

Width:

813mm, 880mm, 1500mm (standard)
800mm – 1500mm (non-standard)

Length: 2440mm, 3660mm (standard)
2000mm – 4000mm
Thickness: 1.5mm – 3.25mm
Alloys: 65032
Temper: W, WP, M
Finish: Mill Finish
    Top

  Aluminium Corrugated Sheets

 

Aluminium Corrugated Sheets - Circlular Model

 
Width of:
  • Corrugated Sheet: 800mm, 1100mm
  • Length of Sheet: 1830mm, 2135mm, 2440mm, 2745mm, 3050mm, 3355mm, 3660mm, 3965mm (standard)
    1830mm – 4000mm (non-standard)
Depth of corrugation:

19mm

No. of corrugations: 10/75 for 800mm width
14/75 for 1100mm width
Width of corrugation: 75mm
Thickness of corrugation: 0.40mm – 1.63mm
Alloys:

31000, 40800, 31500, 51300

Temper: H4
Finish: Mill Finish
    Top

 

Aluminium Corrugated Sheets - Troughed Model

 
Width of:
  • Corrugated Sheet: 795mm, 920mm
  • Length of Sheet: 1830mm, 2135mm, 2440mm, 2745mm, 3050mm, 3355mm, 3660mm, 3965mm (standard) 1830mm – 4000mm (non-standard)
Depth of corrugation:

38mm

No. of corrugations: 6/125 for 795mm width
7/125 for 920mm width
Width of corrugation: 125mm
Thickness of corrugation: 0.5mm – 1.63mm
Alloys:

31000, 40800, 31500, 51300

Temper: H4
Finish: Mill Finish
    Top

  Aluminium Hot Rolled Plates

 

Aluminium Hot Rolled Plates

 

Width (Untrimmed):

In as rolled condition

  • Standard: 865mm, 965mm, 1015mm, 1100mm, 1270mm, 1540mm (approx.)
Width (Trimmed):
  • Standard: 915mm, 1220mm, 1500mm (approx.)
  • Non-standard: 800mm - 1498mm
Thickness (Untrimmed): 4mm – 200mm
Thickness (Trimmed): 6.5mm – 12mm for normal alloys (i.e. alloys of Al-Mn)
6.5mm – 80mm for hard alloys (i.e. alloys of Al-Mg, Al-Mg-Si, Al-Cu-Mg, etc)
Weight: Depends on dimensions
Temper: F / M, O, H1,
Finish: Mill Finish
    Top

  Aluminium Hot Rolled Coils

 

Aluminium Hot Rolled Coils

 

Width (Untrimmed):

In as rolled condition

  • Standard: 890mm, 965mm, 1270mm, 1540mm (approx.)
  • Non-standard: 800mm - 1540mm
  • Tolerance: Not applicable
Thickness: 4.50mm – 12mm for normal alloys (i.e. alloys of Al, Al-Mn, Al-Si, etc.)
4.50mm – 8mm for hard alloys (i.e. alloys of Al-Mg, Al-Mg-Si, Al-Cu-Mg, etc.)
Arbour Diameter: 750mm without spool
Coil Density: 2.25kgs/mm width (approx.)
Coil Weight: 1000 – 4000 kgs
Temper: M, O
Finish: Mill Finish
    Top
______________________________________________________________________________________________________________________
--
All rights reserved to Metal India™ © Copyright 2008. Site designed and maintained by Xploro Technologies - Website/Software Development Company